Two Wire DSL modems are the wireless brand that Qwest has been using and issuing since about January of 2007 (maybe even a little before that).
Sorry, no screen shots yet but to access them and set them up is not too painful since there are only 3 things to change from the default (manufacturer's settings).
1. In your web browser go to : http://192.168.0.1
2. The page that opens up will be your modem's setup page. On the upper right-hand side click on "Site Map".
3. Under the Broad Band Link Menu click on "View Broad Band Settings".
4. Verify that the VPI is "0" and the VCI is "32"
Change "ATM Encapsulation" to "Bridged VC-Mux"
Go to the Username and Password fields and
enter the appropriate data
Click on Save on the lower right-hand corner of the
page.
5. That's it. In a minute or so you should be on the internet. If you want, you can click on Summary to see the connection status or simply try and browse to google.
6. Wireless settings are available for this modem but there is no information for them here yet.